TRENTVALE APEX DARK GREY
The Trentvale Apex dark grey shed is a lovely contemprary colour and offers super value for money. It is availble in 4 sizes, the sliding doors are always on the front (width) of the shed. These sheds don’t come with a floor, they can be anchored down to a slab or concrete base using the Hilti screws or they can be erected on a Foundation Kit (optional).
DIMENSIONS EXPLAINED
x :Overall shed width including roof overhang (roof overhang is 5cm on both sides therefore shed base size is approx. 10cm less than roof size)
y :Ridge height excluding foundation kit (if ordered) this adds 5cm to overall height
z :Eaves height - where the roof starts to slope upwards, excluding foundation kit (if ordered)
Sizes available (width x depth):
6x4, 8x6, 10x8, 10x12
| 6' x 4' | 194cm x 119cm | X=194cm | Y=190cm | Z=170cm |
| 8' x 6' | 253cm x 181cm | X=253cm | Y=190cm | Z=170cm |
| 10' x 8' | 313cm x 242cm | X=313cm | Y=198cm | Z=170cm |
| 10' x 12' | 313cm x 370cm | X=313cm | Y=198cm | Z=170cm |
N.B. the above measurements are the ROOF measurements; the shed width is approx. 10cm less and the shed depth is 10cm less.
Double door opening (6ft model) – 157cm high x 90cm wide
Double door opening (8ft model) – 157cm high x 109cm wide
Double door opening (10ft model) – 157cm high x 130cm wide
Wall & roof panels – 0.25mm thick electro galvanised steel
Door panels - 0.25mm electro galvanised steel
Base rail - 28 x 20mm galvanised steel
Roof supports – 48 x 26mm galvanised steel
Gables – Front and rear have ventilation gaps
Foundation kit (optional) – 50mm x 50mm ‘C’ section steel
10 year manufacturer’s warranty against rust perforation (rusting right through)
Installation
Choose to have your metal shed installed on to your prepared base
Foundation Kit (Trentdale)
Galvanised metal base frame assembles to the exact size of your shed. This can then be boarded out with plywood or similar (by others)
Hilti Fixing Kit
These fixings secure your shed to a slab base or concreted area. They fit through pre-drilled holes in shed's base rail. Kit supplied with masonry drill bit.
The website price includes VAT and delivery to all addresses in England & Wales. Delivery is also included to some addresses in Scotland, some areas of scotland carry a delivery charge and there are some we don't deliver to, see below. The metal and plastic sheds are delivered kerbside, flat-packed in a box / boxes. If installation is ordered, the installer usually follows-on after the shed has been delivered.
Scotland delivery charges:
DG, G, KA, ML - add £29
AB, DD, FK, IV1-40, KY, PA1-19, PH - add £79
Sorry we dont deliver to BT, GY, HS, IM, JE, KW, PA20-78, ZE, PO30-40, IV41-56
What is the delivery lead time?
The current lead time is up to 2-3 weeks delivered and an additional week if fitting is required.
What is included in the price?
All prices include VAT and delivery to all areas of mainland England & Wales falt packed in a box/boxes. Some postcodes in Scotland will be subject to a shipping charge.
What size box does my metal shed come in?
The metal sheds are packed in cardboard boxes and measure approximately 180cm x 80cm x 10cm. The boxes can be quite heavy, larger sheds are packed in two or more boxes. Foundation kits are packaged separately.
Can you provide an installation service?
Yes we can. Prices start from around £200 for smaller metal sheds and increase depending on the size of the shed and if any optional extras are required.
What base do i need for my metal shed?
The ideal base is flat, level slabs or concrete. The shed can be fixed down to this using the Hilti screws or you could use a foundation kit or wooden floor kit (see optional extras). If the Hilti-screws are used to fix the building to your slabs, a mastic sealant is recommended to stop water ingress under the shed walls.
Are the shed dimensions internal or external?
The dimensions given are nominal. For more accurate measurements, please refer to each individual product. The base size (footprint) is given along with the overall size including the roof overhang.
What are the payment terms for metal sheds?
The shed, any accessories and installation need to be paid for in full at time of order.
What guarantee do i get with my building?
These rust resistant storage sheds are supplied with a 10 year Anti-Perforation warranty.
